# Street Progressed Instead Of Completed

**URL:** <https://community.citystrides.com/t/street-progressed-instead-of-completed/26449>\
**Category:** Support\
**Created:** [June 13, 2023, 2:57am UTC](https://community.citystrides.com/t/street-progressed-instead-of-completed/26449 "2023-06-13T02:57:58Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![hans1](https://community.citystrides.com/letter_avatar_proxy/v4/letter/h/e68b1a/32.png) [@hans1](https://community.citystrides.com/u/hans1)\
**Post date:** [June 13, 2023, 11:49am UTC](https://community.citystrides.com/t/street-progressed-instead-of-completed/26449/2 "2023-06-13T11:49:16Z")

</div>

Hi! As you can see in the picture your GPS-trace didn’t hit all the nodes. That’s because this is a tunnel, where you have no satellite contact. So from the point where you first lost contact until you again had contact, there are no GPS-points registered. Most apps just draw a straight line between those two points, but even if this line happens to pass over a node, it won’t be marked as completed because there are no GPS-points in you route at that point (also see this topic which is a bit similar [Long line on my map? - #9 by veronica.b](https://community.citystrides.com/t/long-line-on-my-map/26383/9))  
Tunnels are a nuisance for CS. There might be a possibility to catch the street anyway, I have done it for a tunnel in my neighborhood, and that is to walk on the ground above the tunnel, in that case the you will pass directly over the nodes and you will have a GPS trace to show it,

 ![cs2](https://d25dflut6m8e53.cloudfront.net/original/2X/8/8be55cea1df50c4965a90625f51b6c40f38ff414.jpeg)

---

_[View the full topic](https://community.citystrides.com/t/street-progressed-instead-of-completed/26449)._