# Road status
**URL:** https://community.citystrides.com/t/road-status/19863
**Category:** Support
**Created:** [April 9, 2020, 3:10pm UTC](https://community.citystrides.com/t/road-status/19863 "2020-04-09T15:10:15Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@fredrik.coulter](https://community.citystrides.com/u/fredrik.coulter)
#### Post date: [April 9, 2020, 3:10pm UTC](https://community.citystrides.com/t/road-status/19863/1 "2020-04-09T15:10:15Z")
It doesn’t look like there’s a delay according to the status page. However, it also doesn’t look like my latest run updated the roads completed metric properly.
This morning I ran in my city, filling in some roads. The run was imported, and shows up in City Strides: [CityStrides](https://citystrides.com/activities/9096199) I noticed that there were no completed streets, but 17 that progressed. Given the way the city names roads, this seemed possible, even though I did run some short one block streets just to get them off the list.
So I decided to look at the progressed streets to see where the city has the other pieces of the (presumably) non contiguous street. But the first progressed street I went to, Izetta Court ([CityStrides](https://citystrides.com/streets/2999761)), seemed to have been completed on this run. The road has only two nodes, and I turned both of them green. Yet it’s not listed as completed.
Is this due to a lack of patience on my part, or is there an issue that’s cropped up?
(My profile is [Fredrik Coulter - CityStrides](https://citystrides.com/users/11787/) if you need it.)
---
### Author:  [@bas](https://community.citystrides.com/u/bas)
#### Post date: [April 9, 2020, 3:46pm UTC](https://community.citystrides.com/t/road-status/19863/2 "2020-04-09T15:46:37Z")
I have the same issue with todays run: 30 progressed, 0 completed: [Bas Pennewaert's Activity on April 9, 2020 - CityStrides](https://citystrides.com/activities/9097093)
A couple of streets have 100% green nodes, eg: [CityStrides](https://citystrides.com/streets/4142789)
userid: 7847
---
### Author:  [@ntilley905](https://community.citystrides.com/u/ntilley905)
#### Post date: [April 9, 2020, 3:59pm UTC](https://community.citystrides.com/t/road-status/19863/3 "2020-04-09T15:59:53Z")
There may have been some sort of delay, but I am seeing that street marked complete on your run Fredrik. Are you still seeing it only progressed?
---
### Author:  [@fredrik.coulter](https://community.citystrides.com/u/fredrik.coulter)
#### Post date: [April 9, 2020, 6:25pm UTC](https://community.citystrides.com/t/road-status/19863/4 "2020-04-09T18:25:51Z")
Now it’s complete. Apparently there is another step in the processing of a run that doesn’t show up on the Status page.
I **really** need to develop more patience.
---
### Author:  [@ericjrw](https://community.citystrides.com/u/ericjrw)
#### Post date: [April 10, 2020, 4:48am UTC](https://community.citystrides.com/t/road-status/19863/5 "2020-04-10T04:48:06Z")
@fredrik.coulter, Yes it’s a multi-stage process. First the import. Then the processing. Then the LifeMap. It’s not unusual, at least for me, to see my activity move off the status page, but then have 0 complete, 0 progressed. But then later the 0s start to change.
Hang in there, you’ll get used to it!
Here’s the wiki page on [How Syncing Works](https://community.citystrides.com/t/how-syncing-works/19443)
---
### Author:  [@mattmandelbaum](https://community.citystrides.com/u/mattmandelbaum)
#### Post date: [April 11, 2020, 9:25am UTC](https://community.citystrides.com/t/road-status/19863/6 "2020-04-11T09:25:57Z")
Going even further than this, it appears there is another step I’ve noticed recently where it goes from 0 completed, 0 progressed to showing any completed/progressed streets as progressed. Then it finally turns some of the progressed into completed.
As you guys say, it just needs patience!